SUGINO 한국총대리점 에스엠코리아 홈페이지 방문을 환영합니다.


제목 Synchro Tapper ST4: Servo Feed Tapping Unit 등록일 23-04-25 14:47
글쓴이 관리자 조회 102


st4A compact servo feed tapping unit capable of large diameter hole tapping such as Rc1/2 (aluminum)!

The "Synchro Tapper ST4" is a high torque and compact mechanical feed/electronically controlled tapping unit equipped with an AC servo motor.
Compact and capable of large diameter hole tapping such as Rc1/2 (aluminum). Additionally, stroke and rotation speed settings are easy to do and up to 99 programs can be registered. Furthermore, as cycle time can be greatly reduced using a second home position, accuracy and efficiency of tapping dramatically improves.


Capacity



Specifications

Model number  Cutting feed stroke
rotation speed
Tapping capacity by number of axis Stroke Motor Screw pitch
that can be processed.
Weight
Single axis
Aluminum
(ADC)
Steel
(S45C)
min-1 mm mm kW mm thread/inch kg
ST4-420 Max. 550 M27 M20 Max.
120
2.7 AC
Servo
Motor
0.7
0.75
0.8
1
1.25
1.5
1.75
2
2.5
3
3.5
32
28
27
26
24
20
19
18
16
14
13
12
11
9
8
62
M22 M16

Note:
1. Tapping capacities in the upper row of the table are based on spiral or point tapping, and the lower row are on hand tap 2, both with a tapping depth of 1.5 times the tapping diameter.
2. The selection of cutting speed rotation speeds should be based on the material type of the work, cutting characteristics, diameter and material of taps, cutting speed, etc.
3. Select the most appropriate feed gear for the tapping pitch to be used.
4. The rapid traverse speed and cutting feed rate differ depending on the tapping pitch and rotation speed. For details, contact the nearest sales office.
5. The maximum weight of the mountable attachments is 40 kg for all directions.
6. When machining in a vertical (upwards) direction, take measures to protect the synchro tapper from water and dust. For details, contact the nearest sales office.