SUGINO 한국총대리점 에스엠코리아 홈페이지 방문을 환영합니다.


제목 Synchro Tapper ST2: Servo Feed Tapping Unit 등록일 23-04-25 15:06
글쓴이 관리자 조회 120


st2High precision servo feed tapping unit capable of repeatable, precision The "Synchro Tapper ST2" is a servo feed tapping unit capable of repeatable, high tapping within ±0.03 mm at total stroke end.precision tapping within ±0.03 mm. High speed tapping at up to a maximum of 4,000 min-1. The second reference point greatly reduces cycle time.


Capacity

Specifications

Model number Rotation speed Tapping capacity Stroke Motor Screw pitch
that can be processed.
Weight
Single axis Rapid traverse Lead feed Total stroke
Rapid traverse Lead feed Aluminum
(ADC)
Steel
(S45C)
min-1 mm mm kW mm thread/inch kg
ST2-104 Max. 4,000 When machining M1-M5:
1 - 4,000
When machining M6:
1 - 3,000
M1
-
M6
(M6)
M1
-
M5
(M3.5)
Max. 60 Max. 60 Max. 60 0.6
AC Servo
motor
0.25
0.3
0.35
0.4
0.45
0.5
0.6
0.7
0.8
1.0
100
80
72
64
56
48
44
40
36
32
28
27
26
24
13

Note:
1. Tapping capacities are based on using spiral or point tapping, and with a tapping depth of 1.5 times the tapping diameter. The value in parentheses shows values when hand tap 2 is used.
2. The selection of cutting speed rotation speeds should be based on the material type of the work, cutting characteristics, diameter and material of taps, cutting speed, etc.
3. Select the most appropriate feed gear for the tapping pitch to be used.
4. The rapid traverse speed and cutting feed rate differ depending on the tapping pitch and rotation speed. For details, contact the nearest sales office.
5. The maximum weight of the mountable attachments is as follows. Horizontal machining use: 8kg, Vertical (downward) machining use: 6kg
6. When machining in a vertical (upwards) direction, take measures to protect the synchro tapper from water and dust. For details, contact the nearest sales office.